MIA Upgrades for the Walkera 4#3 Q, now include
Better MIA Stabilization System, MIA TUFF
LG, Various MIA Canopy Styles, a MIA MD Hughes 500E and more
Coming!.
"MIA
Bat" Canopy Kit
for the Walkera 4#3
Helicopters
Give your Walkera 4#3
helicopter that awesome!! Bat look with another
sharp looking and tough canopy. Designed to work with the
stock and MIA Frames. Molded from Carbon-like pattern material.
1 Piece "
Carbon Pattern" Canopy
Mounting
Rubber Supports
$15.99
MIA Moto-Cool-er (Custom Heat Sink)
MIA's especial custom
designed motor heat sink, offers both
"Functionality" and awesome
cool "Hot-Rod Looks!"
A lightweight alternative
to standard and more typical extrusion type heavier heat
sinks. Improves heat dissipation of Walkera 4#3 motor,
at a much lighter weight close to 1 Gram! .
Proprietary
S-Coil shape design and exhaust
pipe pulls heat away from motor by using side airflow to
cool heat sinking coil and pipe. Your Walkera 4#3 will
stay cooler and look cooler too!
Custom Heat
Sink
Heat Sink works with
the following Motors:
Walkera 4#3 Stock
motors, or ANY N20 Type Motor, also works with Micro
Helicopter tail Motors of similar shape and size, N20 or
N30.
$6.99
MIA Shaft Collar
- Swashplate Standoff Kit
Higher Precision for
All Walkera
4#3 Helicopters
This new part, allows
for more precise mechanics' adjustments. No need for set
screw on the collar.
Kit Includes:
1-Anodized Red
CNC machined Collar-Standoff
3- Height and Tension Adjusting O-rings
NEW!
$6.99
Shown installed
on MIA Custom 4#3
MIA Flybar Stability
Tuning Kit
Preset Deluxe
Higher Precision for
All Walkera
4#3 Helicopters
This kit fine tunes the
helicopter rotor head stability and control, by
providing a pre-determined
flybar length and 2 matched and tested anodized red tip
weights to increase the rotor head stability
to, what we feel, is a much better and one-shot
installation, providing a rock steady rotor head
stability and more precise and smoother rotor head
control.
In addition, this kits contains 4 thin
plastic stick on washers to take up slack in the the stock rotor
head blade mounting grips, so that the blades do not
swing loose and out of alignment and you do not risk
bending the rotor head blade grips by trying to over-tighten
the blade grips without the washers. This also aids in
rotor head stability and control.
Kit Includes:
1-Longer metal flybar
2-Anodized Red
CNC machined tip weights
4- Tip weight retainers
4- Rotor Head Blade Mounting Plastic
Washers
NEW!
$11.99
MIA Flybar Stability
Tuning Kit
Adjustable
Higher Precision for
All Walkera
4#3 Helicopters
This kit fine tunes the
helicopter rotor head stability, and control by
providing 8 flybar metal ball tip weights to increase
the rotor head stability and provide a much smoother
control to all 4#3 stock helicopters.
This kit allows you to select the
number of tip weights 1-4 per flybar side and allows you
to dial in the flybar control response desired. If you
like to carry various experiments with the flybar
stability and control response, this is an ideal
inexpensive option.
In addition, this kits contains 2 thin
plastic washers to take up slack in the the stock rotor
head blade mounting grips so that the blades do not
swing loose and out of alignment and you do not risk
bending the rotor head blade grips by trying to tighten
the blade grips without the washers. This also aids in
rotor head stability and control.
TIP: The more flybar tip
weights you use, the more stable your helicopter
becomes.
Note: Too much or too less tip
weights can make the helicopter too sensitive or too
sluggish.
Kit Includes:
1- Longer metal flybar
8- Metal Ball Tip weights (Brass or Chrome)
2- Tip weight retainers
2- Rotor Head Blade Mounting Plastic
Washers
NEW!
$6.99
Coming Soon ! MIA MD500E
Scale Body Kit
for the Walkera 4#3Q
Helicopter
A Beautiful! Scale Highly
Detailed And Assembled Body to add that extra touch of
realism to your Walkera 4#3 Q helicopter. Comes with
Detachable Front End window to ease installation of
mechanics
Color Scale
Body (with Matching Tail stabilizers)
Matching
Color Tail Fin Set
Decals
Please Read
Manufacturer Instructions and use in a well ventilated area.
CA Glue Medium Viscosity
For all Hobby Modeling Assembly Projects requiring an
easy to use CA Glue . Bottle size ideal for various
model assembly projects. Works great with MIA G10 and
Carbon Frames Assembly.
Tip: Apply
to joining parts, then use CA Accelerator (Kicker)
spray
to speed up Joint
assembly.
1/2
Fluid Oz. Bottle with Fine Tip Nozzle Applicator
$4.99
Please Read
Manufacturer Instructions and use in a well ventilated area.
CA Accelerator Spray (Kicker)
For all Hobby Modeling Assembly Projects requiring a
Fast CA Glue Joint Setting
2 Fluid Oz.
Bottle and Sprayer
$6.99
MIA "TUFF ™" Training Gear Kit
for
the Walkera 4#3's, 5G6, Lama 2 Helicopters
Especially
made for assisting first -time pilots, learn to fly
ultra tiny helicopters. Simple yet extremely effective
design, has natural spring cushion and grips to slippery
floors while allowing easy take offs and spider like
grip landings!
Press-Fit assembly for
ease of assembly and compact transport.
This particular Kit is
made to the correct proportions and weight for MIA
Palm-Size Helicopters, works perfectly with all
Walkera 4#3 tiny helis. Tired of heli tip overs?
or afraid to crash on first flights? Try this training
gear, you will probably never want to take it off!
1 G10 CNC machined center
4 Formed Legs
4 yellow, rod end tips
4 skid attachments
NEW!
$6.99
MIA Thin 32 AWG Flexible
Wire Kit
for the Walkera 4#3's, 5-6, Lama 2 Helicopter
Ideal size
wire for Walkera tiny helis and all palm size helicopter
connections, in particular for Walkera 4#3's and 5-6 stock
main and tail rotor motor connections. This wire can
also be used to make lighter weight 14" antennas for
close range flying, since it is lighter and thinner than
stock Walkera 4#3 Antenna wire.
Red and
Black Set ( 14" Long)
$1.29
MIA JIS #000
Ultra Precision Screwdriver
for the Walkera 4#3Q
Helicopter
Designed
especially for Palm Size Helicopters, like the Walkera
4#3Q, 5G6, 4G3, 4#3, Blade MCX, MIA and similar ones
that uses ultra miniature hardware that require extra
finesse and ultra precision.
Works and feels comfortable, the tubular thinner
diameter of this MIA tool, allows for greater handling
finger tip precision , when tightening or loosening
ultra
tiny
screws.
A great tool for
Palm-Size Helicopters or Hobby Projects Requiring
Precision.
Aluminum
Handle
Black Oxide
Precision Tip
Engraved
Industry Standard Type and Size
NEW!
$7.99
A perfect tool designed for the
5G6 Helicopters
Smaller tip than the #00 for
smaller head screws such as the really tiny ones used on rotor head and blade
grips
Complementary tool to MIA
JIS #000
If you already have the
#000, Get this
#00 one for larger size
screws.
MIA JIS #00
Ultra Precision Screwdriver
for the Walkera 4#3Q Helicopter
Designed
especially for Palm Size Helicopters, like the Walkera
4#3Q, 5G6, 4G3, 4#3, Blade MCX, MIA and similar ones
that uses ultra miniature hardware that require extra
finesse and ultra precision.
Works and feels comfortable, the tubular thinner
diameter of this MIA tool, allows for greater handling
finger tip precision , when tightening or loosening
small
screws.
A great tool for
Palm-Size Helicopters or Hobby Projects Requiring
Precision.
Aluminum
Handle
Black Oxide
Precision Tip
Engraved
Industry Standard Type and Size
NEW!
$7.99
A perfect tool designed for the
5G6 Helicopters
Wider Tip than the #000 for
larger head screws such as motor mounting screws