Kit assembles into this
|
|
MIA Phantom G10 Fiberglass Frame/LG/Fins Upgrade Kit
for the Walkera 52#
Helicopter |
 |
This
upgrade frame Kit turns your Walkera 52# Helicopter
into a more realistic and better performing
Sub-Micro helicopter. |
|
It solves
the bending and twisting problems associated with the
stock aluminum Walkera 52# frame, by providing for a more solid
structure that enhances performance with little or
zero maintenance worries. |
|
It solves
the problem of easily breaking the Landing Gear
on the stock Walkera 52# by providing a much better,
almost indestructible, MIA
TUFF™
Landing Gear. |
|
Removes
that
"toy-like" look of the stock Walkera 52# by
providing a frame and (optional) canopy setup
that has been engineered more methodically,
aerodynamically and aesthetically. |
|
Improves
overall stability by design and by allowing battery to
be relocated easily to adjust for better CG than stock
heli. |
|
Provides
a better and easier mounting method for various size
motors. |
Designed to follow traditional real larger RC
Helicopter architecture, and parts CNC milled from light
but strong fiberglass plate. Includes stronger Boom.
Your Walkera 52# helicopter will simply fly and look
awesome! |
|
Main Frame
(Bolt-On) |
|
Tail Rotor
Box - Direct Drive or Geared Drive |
|
Multi-Motor
Mount |
|
Fin
|
|
Struts and Skids
|
|
Carbon Boom |
|
Red and
Black Wire |
|
Hardware |
|
Video Instructions
at this site |
|
|
Frame works with the
following Motors with 1.5 mm Shafts:
ANY Motor that fits
the stock motor mounting, both stock Carbon Brush
types, as well as Brushless (i.e. Medusa , Feigao IPS or
Stock Walkera 130 or the Much Better Stock Motor,
the MIA 180 with carbon brushes)
You will Need CA Glue
& Kicker Sold Separately Below
|
|
$49.99
|
|
COMING! |
|
"The
Phantom " MIA Wood Blade Kit for the Walkera
52#
Helicopter |
|
Give your Walkera
52# or MIA Phantom Convertions a more subtle control
and performance with these MIA Flat-Bottom Wood
Blades. |
|
Flat Bottom
Wood Blades ( Set) |
|
Mounting
Hardware |
|
|
|
 |
|
"The
Phantom - Stealth 52" MIA Canopy Kit for the Walkera
52#
Helicopter |
|
Give your Walkera
52#
helicopter that awesome!! stealth look with this
Superb! canopy. Designed to work with the
MIA Phantom Frame. Molded from Carbon-like pattern material. |
|
Canopy (1
Piece Canopy) |
|
Mounting
Rubber Supports |
|
|
$15.99
|
This canopy comes in
Solid White.
White Canopy's window was cut out to achieve the Custom carbon
window effect, with the use of the carbon pattern window, sold
separately. |
|
"The Phantom - Edge 52 " MIA Canopy Kit for the Walkera
52#
Helicopter |
|
Give your Walkera
52# helicopter that added "edge", with this ultra cool
canopy. Designed to work with the MIA Phantom Frame.
Molded in white. |
|
White Canopy
ONLY (2
Piece Canopy) |
|
Mounting
Rubber Supports |
|
|
If you like the two-tone look,
purchase the carbon pattern window, sold separately.
|
|
$8.99
|
 |
|
"The Phantom" MIA Carbon Pattern Window for the Walkera
52#
Helicopter |
|
Designed
to work with the MIA Phantom 52 Phantom - Edge Canopies. |
|
Carbon
Pattern Window |
|
|
$6.99
|
 |
|
MIA 180 Carbon Brush Motor |
|
2.0 mm Shaft
|
|
for the Walkera
52# Helicopter |
Benefits when used with MIA 2mm 8T Pinions
|
A long
lasting alternative to using the 52 stock 150 carbon
brush motor at slightly larger size. |
|
More power,
more motor life, a well made carbon brush motor that
takes a licking and keeps on ticking! |
|
Improves
Flight Times |
|
Motor works
on 2 and 3 cells, but Runs Cooler on 2 cells .
|
|
|
Installation: Mounting Hardware Supplied |
|
Motor works also on
the following Helicopters: |
-
-
Stock Walkera
52#
RotoFLy
MIA Bumble Bee
Just about any
Sub-Micro Helicopter
|
|
$12.99
|
 |
|
MIA High Power Carbon Brush
Tail Motor |
|
1.0
mm Shaft
|
|
for the Walkera
52# Helicopter |
Benefits:
|
A long
lasting alternative to using the 52 stock tail carbon
brush motor at slightly larger size. |
|
More power,
more motor life |
|
Improves
Tail Control |
|
Motor works
on 2 and 3 cells, but Runs Cooler on 2 cells .
|
|
|
Installation: Mounting hardware Supplied |
|
Motor works also on
the following Helicopters: |
-
-
Stock Walkera
52#
RotoFLy
MIA Bumble Bee
Just about any
Sub-Micro Helicopter
|
|
$8.99
|
|
Molded
0.25 inches tall
 |
|
MIA Molded Long 8T Pinion
Gear |
|
1.5mm Bore,
0.5 mm Module
|
|
for the Walkera
52# Helicopter Motors |
Benefits when used with stock Walkera 52#, or IPS size
Motors.
|
This
particular molded gear is 1/4 inch tall for more gear
mesh power. |
|
Improves
Head Speed. Gives your Walkera 52# helicopter more
stable and smoother control feel. |
|
Improves
Flight Times |
|
Keep Motor
Running Cooler. |
|
|
Installation: Press Fit |
| Pinions
work with the following Motors installed on MIA
52# Frames: |
-
-
Stock Walkera
52#Main motor
Medusa 4000KV (IPS
Size)
-
|
|
$5.99
|
|
Molded
0.25 inches tall
|
|
MIA Molded Long 8T Pinion
Gear |
|
2.0
mm Bore, 0.5 mm Module
|
|
for the Walkera
52# Helicopter Motors |
Benefits when used with 180 size
Motors.
|
This
particular molded gear is 1/4 inch tall for more gear
mesh power. |
|
Improves
Head Speed. Gives your Walkera 52# helicopter more
stable and smoother control feel. |
|
Improves
Flight Times |
|
Keep Motor
Running Cooler. |
|
|
Installation: Press Fit |
| Pinions
work with the following Motors installed on MIA
52# Frames: |
180 Size motors with
2mm shafts such as MIA Carbon Brush 180
|
|
$5.99
|
Dimensions in millimeters |
|
MIA Brass Short 8 T Pinion Gear
|
|
1.5mm Bore, 0.5 mm Module |
|
for the Walkera 52# Helicopter Motors |
Benefits when used with stock Walkera 52#, or IPS size
Motors.
|
Improves
Head Speed. Gives your Walkera 52# helicopter more
stable and smoother control feel. |
|
Improves
Flight Times |
|
Keep Motor
Running Cooler. |
|
|
Installation: Press Fit
with these Pinions with Locktite. |
| Pinions
work with the following Motors installed on MIA
52# Frames: |
-
-
Stock Walkera
52#Main motor
Medusa 4000KV (IPS
Size)
-
|
|
$4.99
|
 |
|
MIA Thin 32 AWG Flexible Wire Kit
for the Walkera
52# Helicopter |
| Ideal size
wire for Walkera tiny helis and all palm size helicopter
connections, in particular for Walkera 52# stock tail rotor motor connections. This wire can also be
used to make lighter weight 14" antennas for close range
flying, since it is lighter and thinner than stock Walkera
Receiver Antenna wire. |
|
Red and
Black Set ( 14" Long) |
|
|
$1.29
|
Please Read
Manufacturer Instructions and use in a well ventilated area.
|
|
CA Glue Medium Viscosity |
|
For all Hobby Modeling Assembly Projects requiring an
easy to use CA Glue . Bottle size ideal for various
model assembly projects. Works great with MIA G10 and
Carbon Frames Assembly. |
- Tip: Apply
to joining parts, then use CA Accelerator (Kicker)
spray
- to speed up Joint
assembly.
|
|
1/2
Fluid Oz. Bottle with Fine Tip Nozzle Applicator |
|
|
$4.99
|
Please Read
Manufacturer Instructions and use in a well ventilated area. |
|
CA Accelerator Spray (Kicker) |
|
For all Hobby Modeling Assembly Projects requiring a
Fast CA Glue Joint Setting |
| |
|
2 Fluid Oz.
Bottle and Sprayer |
|
|
$6.99
|
-
Ordering
and Shipping Info , Click Here
-
|
Sub-Micro
Helicopter Upgrades
