The Upgrades on this Page will also work
with the Novus and Mini Spark FP helicopters.
Walkera, Novus, Buzzfly and Mini Spark helicopters
share the same architecture and parts, only different label.
Walkera Genius CP Short comparison and review with the Blade
mCPX
Similar in size to the Walkera 4#3
and Blade mCPX
Stay Tuned For MIA TUFF Phantom and
Edge Combo Kit Upgrades
for the Walkera Genius CP
MIA Custom G10 Rigid LG Look
MIA TUFF LG Basic Look
Set up for Direct
Drive
with stock 4#3 Motors
Set up for
Geared Drive
with stock
4#3B Motors.
MIA Rigid G10 Frame Kit
MIA Longer Boom
MIA Edge Canopy/Standard Decal Kit
MIA TUFF Landing Gear Kit
MIA Edge Canopy/Hot Rod Decal Kit
MIA Flybar Stability Tuning Kit
-Deluxe
...Using Various
MIA Walkera 4#3 Upgrades Options Listed Below. Most MIA Upgrades are
interchangeable amongst all Walkera 4#3 "SIZE" Helicopter versions.
Top: MIA G10 Fiberglass Frame/LG,
Upgrade RIGID -STRUT VERSION
Bottom: Original Walkera 4#3 Main Frame and thin
Landing Gear
WE ARE LOOKING INTO TO SEE IF THIS MIA UNIVERSAL PALM SIZE
FRAME WILL ALSO WORK WITH THE GENIUS CP
Note this frame no longer has
the undercarriage mounting hardware to save weight.
It now comes with integrated
G10 Fiberglass LG Struts parts for a Light weight and robust
Tongue and Groove assembly.
MIA UPS (TM) - Universal Palm Size
Ultra Miniature Helicopter
Frame Kit
for the following Helicopters:
Walkera 4#3 (Novus Fp)
Helicopter
Walkera 4#3 A/B (Novus FP)
Helicopter
Walkera 4G3 (Novus CP)
Helicopter
MIA Standard Palm Size
helicopter
or Your Own Hybrid Palm Size
helicopter
This
upgrade frame Kit turns the above mentioned helicopters into
a robust, yet lightweight, more realistic tiny
helicopter. It eliminates the "toy-like" look of the
stock Walkera, Novus, Mini Spark helicopters and
makes them more versatile.
A must have
Wakera 4G3 frame upgrade!, Takes up to 3 Walkera 4#3/4G3
servos for full Collective Pitch CCPM operation. Also
works with Fixed Pitch 2 servo mechanics. For Scale
helicopter projects, like the MIA MD Hughes 500,
simply remove the boom and drop the main frame with
mechanics inside the scale fuselage.
Key
features
Quick
Strong Assembly - Tongue and Groove Design
Combines CA
gluing and miniature hardware build
Builds into
a Universal and extremely Versatile Frame
Gorgeous
Unique Design and Parts layout
Can be used
with various and unlimited RC equipment
Can be used
with previous MIA (FELX/RIGID) white block bearing
supports and parts, included in kit, for total
versatility in choice of particular assembly for
particular helicopter set up and type.
Longer Fin Set
for greater tail rotor protection.
Can be used
with MIA Canopies and scale bodies as well as Stock
ones, direct and some with slight modification.
Tail gear
box with provisions for various size and bolt on motor
holder diameters, 2 gm, 2.9 gm BL Direct Drive or Geared
Drive motors.
Includes
MIA TUFF (TM) LG with aluminum spacers and metal landing
gear hardware kit
New
Lightweight but strong G10 Skids
MIA
original FLEX-RIGID Upgrade Frame Carbon Boom included,
Aluminum larger diameter optional .
Red and
Black Wire
Designed to follow traditional real larger RC
Helicopter architecture, and parts CNC milled from
thin light G10 Fiberglass plate. Includes a New
wider than stock diameter aluminum Boom
and longer tail fin.
Your Walkera, Novus, Spark or similar size and type Palm-Size helicopter will simply look
awesome!
A COMPLETE NEW HELICOPTER
STRUCTURE PACKAGE!
Main Frame
Parts CNC machined from G10 Fiberglass
MIA TUFF
(TM) Ultra Miniature LG Kit
G10 Skids
Carbon Boom
Original
MIA Flex-Rigid Frame
Blocks
Red and
Black Wire
You will Need CA Glue
& Kicker Sold Separately Below
Intro Price $39.99
A perfect Light and tough
Ultra-miniature, universal application, helicopter frame
MIA JIS #000
Ultra Precision Screwdriver
for the Walkera and Blade Helicopters
Designed
especially for Palm Size Helicopters, like the Walkera
Genius CP,
4G3, 4#3, CB100, etc, Blade MCX,mSR, mCPX, MIA and similar ones that
uses ultra miniature hardware that require extra
finesse and ultra precision.
Works and feels comfortable, the tubular thinner
diameter of this MIA tool, allows for greater handling
finger tip precision , when tightening or loosening
ultra
tiny
screws.
A great tool for
Palm-Size Helicopters or Hobby Projects Requiring
Precision.
Aluminum
Handle
Black Oxide
Precision Tip
Engraved
Industry Standard Type and Size
MIA JIS #00
Ultra Precision
Screwdriver
for the Walkera and Blade Helicopters
Designed
especially for Palm Size Helicopters, like the Walkera
Genius CP,
4G3, 4#3, CB100, etc, Blade MCX, mSR, mCPX, MIA and similar ones that uses ultra miniature
hardware that require extra finesse and ultra precision.
Works and feels comfortable, the tubular thinner
diameter of this MIA tool, allows for greater handling
finger tip precision , when tightening or loosening
small screws.
A great tool for
Palm-Size Helicopters or Hobby Projects Requiring
Precision.
Aluminum
Handle
Black Oxide
Precision Tip
Engraved
Industry Standard Type and Size
Please Read
Manufacturer Instructions and use in a well ventilated area.
CA Glue Medium Viscosity
For all Hobby Modeling Assembly Projects requiring an
easy to use CA Glue . Bottle size ideal for various
model assembly projects. Works great with MIA G10 and
Carbon Frames Assembly.
Tip: Apply
to joining parts, then use CA Accelerator (Kicker)
spray
to speed up Joint
assembly.
1/2
Fluid Oz. Bottle with Fine Tip Nozzle Applicator
$4.99
Please Read
Manufacturer Instructions and use in a well ventilated area.
CA Accelerator Spray (Kicker)
For all Hobby Modeling Assembly Projects requiring a
Fast CA Glue Joint Setting
2 Fluid Oz.
Bottle and Sprayer
$6.99
MIA Thin 32 AWG Flexible
Wire Kit
for the Walkera and Blade miniature Helicopters
Ideal size
wire for Walkera tiny helis and all palm size helicopter
connections, in particular for Walkera 4#3 stock main
and tail rotor motor connections. This wire can also be
used to make lighter weight 14" antennas for close range
flying, since it is lighter and thinner than stock
Walkera 4#3 Antenna wire.
Red and
Black Set ( 14" Long)
$1.29
Stick On Decal
Sheet
King,
Skulls, Winged, Breeze
MIA Decal
Sticker Sheet
Ultra thin,
lightweight but strong decal
sticker set designed to give our
palm size canopies and, most
importantly, your Walkera or Blade miniature helicopter a super custom look. The
artistic custom graphic design layouts are superb! and
considerably add to the "larger helicopter" image, at a
palm-size helicopter scale.
Decals Set,
for 4 Helicopter Configurations
$6.99
Stick On Decal
Sheet
Shark, Zebra, Leopard, Tiger
MIA Decal
Sticker Sheet
Ultra thin,
lightweight but strong decal
sticker set designed to give our
palm size canopies and, most
importantly, your Walkera or Blade miniature helicopter a super custom look. The
artistic custom graphic design layouts are superb! and
considerably add to the "larger helicopter" image, at a
palm-size helicopter scale.
Decals Set,
for 4 Helicopter Configurations
$6.99
Stick On Decal
Sheet
Flames,
Lightning Bolts, Dice, Lucky 7
MIA Decal
Sticker Sheet
Ultra thin,
lightweight but strong decal sticker set designed to
give our palm size canopies and, most importantly, your
Walkera or Blade miniature helicopter a super custom look. The
artistic custom graphic design layouts are superb! and
considerably add to the "larger helicopter" image, at a
palm-size helicopter scale.
Decals Set,
for 4 Helicopter Configurations
$6.99
MIA "TUFF ™" Training Gear Kit
Also works with the
Walkera Genius CP, but originally made for the Walkera
4#3 and similar size helicopters.
Especially
made for assisting fist -time pilots, learn to fly ultra
tiny helicopters. Simple yet extremely effective design,
has natural spring cushion and grips to slippery floors
while allowing easy take offs and spider like grip
landings!
Press-Fit assembly for
ease of assembly and compact transport.
This particular Kit is made to the correct
proportions and weight for MIA Palm-Size Helicopters, works
perfectly with all Walkera 4#3 tiny helis.
Tired of heli tip overs? or afraid to crash on first
flights? Try this training gear, you will probably never
want to take it off!
1 G10 CNC machined center
4 Formed Legs
4 yellow, rod end tips
4 skid attachments
NEW!
$6.99
Photo is of Walkera 4#3 which we did the
original MIA Swashplate Link Tuning kit for, but also applies
to the Walkera Genius CP, as well as other similar size
helicopter such as the Blade mCPX.
MIA Swashplate Link Tuning Kit
for the Walkera Genius CP
and similar size Helicopters such as the Blade
mCPX
to improve Steering
Control Precision
A set of 12 o-rings, of select durometer, to take up slop in the
mechanics such as between swashplate ball
links and servo arm ball link sockets to remove
the Genius swashplate ball-link play and increase
precision and control.
12 O-rings of select durometer for
precise fit
$2.99
Custom MIA Canopy
Extravaganza!
for the Walkera 4#3 (Novus)
and similar size Helicopters
Here are some cool ideas on how
our color canopies look with our stick on decals.
We have numerous combinations
and ideas to fit your particular style. Try Your own
by simply mix and matching the color canopy with the
decal artwork from one of our 3 decal sheets,
Standard, Wild and Hot Rod series. Tip: Dark Color
canopies look great with white and light window
patterns, while light color canopies look great with
darker decal patterns. For example: The orange and red
color canopies were done with the first set of decal
patterns, from the "Standard" decal sheet, these
patterns give the illusion your 4#3 is more like a
Honey Bee king CP larger helicopter. Can you
picture the windows in white? how cool could that
look? You can take our patterns and simply trace
over with sticky white glossy paper, trim and apply!
it is that simple!. Give it a shot! It is fun!
and you will have a new look on your 4#3 you will be
proud of.
Our Phantom Canopy (Carbon Safari
Look) with white stick on patterns traced from our
"Wild" decal sheet and applied individually.
Our Edge Canopy (Yellow) with stick on
patterns from our "Standard" decal sheet cut and
applied individually.
Palm-Size Helicopter Upgrades
