Helping People
Get the Most out of the Hobby
Products - Upgrades
Durafly AutoG  and Auto-G2
Home | Up | MIA Videos | Services | Information | Contact Us
 
Home
Up
MIA  Blog
Durafly Auto G/G2
and Instructional Videos

 
MIA G2™
EGA Line
 
RC Autogyros Parts
 
 Robust
* Enhanced
* Geometry
* Aerodynamics
 
 

 
NEW September 2014 !
MIA EZ™ Gyro 1.25 High Performance
A Sexy Design
Conversion Upgrade Kit (Pusher Bensen Style)
for the Auto G/G2 RC Autogyro

 Based on our proven MIA EZ™ Gyro Line. At 1.25X larger than the MIA EZ™ Gyro 1.0
and smaller than the MIA  EZ™ Gyro 1.5 AKA MIA BBW (Bensen- Brock-Wallis) original MIA Pusher RC Autogyro.
As can be seen in the following photo and videos, the style is the same and thus the flight characteristics
of the Auto G/G2 converted to Pusher can be expected to be very similar.
 

 


Originally designed as a stand alone OEM MIA Product but we decided to offer it also as a conversion kit
for the
Auto G/G2 to answer requests by some of our customers for a Bensen Style pusher conversion for the Auto G/G2.
We even include our very own and unique trademark design MIA DC Control Head and the same successful MIA
EGA™ Flex Plate and head we have been selling already as upgrades for the AutoG/G2.
 
$79.99
MIA EZ (TM) 1.25 RC Autogyro Pusher Conversion Kit - Auto G/G2
(For Hobby King Distributed and OEM Durafly Auto-G and Auto-G2 RC Autogyros)

You simply Add the following parts from the Auto G/G2:
Original Motor, ESC, Prop, Blades, 1300 mah 3S Li-Pol Battery

For Higher Performance
Change to Metal Gear Servos with MIA (3 Servo Pack) Listed below
 
For Added Realism
Use MIA 1.25 Pilot Figure

The Durafly Auto G/G2 requires the MIA EZ 1.25 Size  Conversion Kit  

The MIA EZ 1.5 is a miss print.

 

In order to maintain the MIA Trademark Design, the MIA EZ™ 1.25 Gyro Conversion Kit

contents are same style as the MIA EZ™1.0 shown below except 1.25 X larger.

The Auto G/G2 Conversion Kits do Not come with Blades, Electronics, Motor or Prop, since these get

transferred over from the Stock Auto G/G2.
MIA EZ (TM) 1.25 RC Autogyro Pusher Conversion Kit - Auto G/G2
MIA EZ(TM) 1.25 Gyro Metal Gear Servos (3) Kit
Please allow 1 week for delivery USA Orders only

NEW!!! MIA 1.25 Articulated Pilot Figure with Animatronic Head
 
By customer requests. We have added yet another option to take the Fun! of RC Flying to a higher level!
 
 
 
This is MIA's Famous Pilot Figure that pilots all of our Ultralight models, beginning with the MIA EZ™ Trikes 1.25.
as well as the MIA Quicksilver Style Ultralights and even MIA 1.25-1.5 size RC Autogyros and RC Helicopters. 
The size is a bit larger than a GI-Joe figure, which makes it more visible,  but at a fraction of the weight and
suitable for RC Ultralight models and customers who wish to have a more realistic and ultra lightweight articulated
 pilot figure on their model.
 
This Pilot Figure comes with a servo operated head ready to use.  An optional servo delay circuit and mixer can
be also used to make the head move more slowly in proportion to the aileron, elevator or rudder control.
A sample video with the pilot mounted on our MIA EZ Trike 1.25, the figure hand grips can be positioned to a
regular stick control mounted on side of the Ultralight seat or center to mimic real hand to stick control.  
 
     
MIA 1.25 Ultra Lightweight Articulated Pilot Figure - with Animatronic Head
 

MIA G2 EGA™ (Enhanced Geometry and Aerodynamics) Line
 

Mast covers comes assembled like these samples

 
Plus a Free G10 Fiberglass CNC Machined MIA Delta Flex Plate
(included in the MIA Racer G2 Kit), Direct Mounting Replacement to stock Auto-G (G2) plastic tri-tab flex plate
MIA Racer G2 Kit -
(For Hobby King Distributed and OEM Durafly Auto-G and Auto-G2 RC Autogyros)

$ 24.99
* Price with Free G10 Flex Plate Style A
 
 Ready To Install Parts

Contents:
• Single Piece Molded LG Pants and Wheel Covers
• Single Piece Molded Motor Cover
• Single Piece Molded Pilot Helmet
• Assembled Molded Mast Cover
• Mast Cover Locking Thumb Screw and Nut
• Mounting Foam Tape
• Decorative Vinyl Decal Helmet Shield Pattern and Trim Strips (maybe come applied or in sheet) 
• FREE G10 Flex Rotor Plate Style A
 
Features
* Solid Color Molded Lightweight Plastic
* Option of Various Colors
* Easy, Pre-Trimmed, Ready to Mount. All parts come with Foam Mounting Tape
* Mast Cover Pre-assembled. Thumb-Screw Lock
* Highly Durable CNC Machined G10 Fiberglass Rotor Flex Plate
 
Color Options
MIA G2 Delta G10 Flex Plate Style A              Durafly Auto-G/G2 Tri-tab Plastic Flex plate
 
MIA Delta G10 Flex Plate Style A
(Direct Replacement for stock Durafly Auto-G/G2 Tri-Tab Flex Plate)
Works with: Auto-G,  Auto-G2, MIA and DIY RC Autogyros

$ 2.49
 
 Ready To Install Parts

Contents:
• CNC Machined G10 Rotor Flex Plate (Color per customer choice)
 
Features
* Direct Mounting Hole to Stock Rotor Hub and Pitch Shim Plates
* Wider Blade Mounting Delta Plate Design. Resists Hard Crashes
* Highly Durable CNC Machined G10 Fiberglass
* Option of Various Colors
* Works with more robust " optional" MIA CNC Delrin Rotor Hub or Stock Auto-G/G2 ABS Rotor Hub

 
Color Options
MIA G2™ Style B - Enhanced Geometry and Aerodynamics
Rotor Head Single Hole Blade Mount Delta G10 Flex Plate with Drill Jig Kit
(Upgrade for stock Durafly dual hole Blade Plastic Flex Mount)
Works with:
Auto-G, Auto-G2, MIA and DIY RC Autogyros

$ 9.99
 
 Ready To Install Parts

Contents:
• CNC Machined G10 Rotor Flex Plate
• (6) Small Nylon Blade Pitch Shim Bolts and Nuts Set plus (1) Set  Spare
• (3) Large Metal Blade Mounting Bolts and (3) Nylon Lock Nuts
• CNC Machined Single Hole Blade Mount Drill Jig (4) Aluminum spacers
 
Features
* MIA Trademark Original and Innovative RC Autogyro Robust and Precise Rotor Flex Plate Design
* Single Bolt Self Centering Blade Mount and Suspension 
* Adjustable Blade Pitch and Self Adjusting Blade Washout Geometry
* Assists in Faster Rotor Spin ups w/o need for an electric Auto-Start or Pre-Rotator
* Single Mounting Hole Blade Modification Drill Jig Included
* Delta 3 point Robust Mounting Bolts and Locking Nuts
* Can be used with Auto G stock Rotor hub parts or more robust MIA G2 Rotor Hub Kit
* Highly Durable CNC Machined G10 Fiberglass
* Option of Various Colors

 
Color Options
 
NEW! 2014 Version Refined. After several tests with the new 2014 version we decided to replace this part in lieu of the older version, it is lighter and removes some unnecessary bulk of the original 2013 version.  Part is fastened to the Rotor head plate in same manner as the MIA 2013 version with the supplied metal hardware. Part mounts from under the rotor head delta flex  plate,  leaving room at the top,  cleanly,  for the stock locking rotor shaft nut and the head button. With a new center mounting post and beefy support lower plate there is no need for a top plate. 
 
               
 
MIA G2™ Solid Three-Point Mount  "Delrin" Rotor Hub Kit
Shown here assembled with the "Optional" MIA G2 Style B EGA Rotor G10 Flex Plate
with the stock head button.
(Upgrade for stock Durafly ABS Plastic Rotor Hub)
Universal Part Works with:
Auto-G, Auto-G2, MIA and DIY RC Autogyros


$ 5.99
 
 Ready To Install Parts

Contents:
• CNC Machined Delrin  Delta Plate Support with Centering Mounting Post
• (3) Metal Bolts and (3) Nuts
 
Features
* Robust and near indestructible Design works with Auto-G/G2 Stock or MIA Flex Plates
* CNC Machined Self Lubricating High Strength Delrin Plastic  (Not ABS)
* Requires no ball bearings when used as a free-wheeling hub with smooth rotor shafts
* Center bore fits 3mm stock Durafly rotor threaded shaft with a snug fit to hold rotor in place.

 

 
Color

2013 Version No longer Available. See 2014 Version
 
MIA G2™ Solid Three-Point Mount  "Delrin" Rotor Hub Kit
Shown here assembled with the "Optional" MIA G2 Style B EGA Rotor G10 Flex Plate
without need for head button.
(Upgrade for stock Durafly ABS Plastic Rotor Hub)
Works with:
Auto-G, Auto-G2, MIA and DIY RC Autogyros


$ 5.99
 
 Ready To Install Parts

Contents:
• CNC Machined Delrin Hub Upper and Lower Plates
• (3) Metal Bolts and (3) Nuts
 
Features
* Robust and near indestructible Design works with Auto-G/G2 Stock or MIA Flex Plates
* CNC Machined Self Lubricating High Strength Delrin Plastic  (Not ABS)
* Requires no ball bearings when used as a free-wheeling hub with smooth rotor shafts
* Center bore fits 3mm stock Durafly rotor threaded shaft with a snug fit to hold rotor in place.

 

 
 
 
MIA G2 (TM) Rotor Head Tuning Kit (REMOVES SLOP IN STOCK ROTOR HEAD)
 
(Indispensable! Tune Up Kit for stock Durafly Rotor shaft and Pivot Head)
Works with:
Auto-G, Auto-G2 RC Autogyros


$ 4.99
 
 Ready To Install Parts

Contents:
• Metal, Plastic and Rubber parts
 
Features
* Eliminates Stock Rotor Head Shaft Up/Down and Left/Right Pivot Control Slop which causes
   unwanted elevator-like control oscillations and rob the model of precision control.
* Rubber Collars Lock the Control Clips in place to prevent Control Link Slips.
* Makes the stock rotor head more precise and improves overall control handling.
 
Rotor Head Tune Up Kit
 
MIA G2 LG Reinforcement-Alternate Location Battery-Camera Mount Plate Kit
Works with:
Auto-G, Auto-G2, MIA and DIY RC Autogyros


$ 6.99
 
 Ready To Install Parts

Contents:
• CNC Machined G10 Fiberglass Plate
• (2) Large Nylon Bolts (2) Nuts
• (2) Small Nylon Bolts (2) Nuts
• (2) Nylon Clips
• (2) Soft Plastic Spacers
•  2-Sided Sticky Tape
• (1) Rubber Strap
 
Features
* Molded Lightweight Plastic Parts
* Option of Various Colors
* Easy Ready to Mount with double-sided high quality tape
* Highly Durable CNC Machined lightweight G10 Fiberglass
* Reinforcement for stock Durafly LG to Body
* Provides alternate Battery Mount to allow better Battery cooling and easier CG  adjustment
* Can be also used as lightweight pocket camera mount

 

Colors Options
 
OLIVE DRAB HERE
  
MIA Racer G2 Decal Kit - Auto-G Auto-G2

$ 14.99
 
 Ready To Install Parts

Contents:
• 2 Sheets Waterproof Sticky Back No Residue High Quality Decals
 
Features
* Waterproof Durable Decals (these are not like the onion skin stock decals that peel off easily)
* Help Reinforce the Foam Body and Stabilizing Areas
* Easy Trim, Peel and Apply
* High Visibility Graphics in a Racing Scheme Color of Choice
* Personalize your Auto G Professionally
   We will Print your Name and 2 Digit Racing Number on the decals for you at no extra charge.
   Please Let us know  Via Email Or Via Paypal Special Instructions to Seller.
 
Color Options
 
MIA G2Single Color Decal Kit - Auto-G Auto-G2

$ 12.99
 
 Ready To Install Parts

Contents:
• 2 Sheets Waterproof Sticky Back No Residue High Quality Decals
 
Features
* Waterproof Durable Decals (these are not like the onion skin stock decals that peel off easily)
* Easy Trim, Peel and Apply
* High Visibility Graphics in a Simple Single Color Tone with Black and White Lettering
 
Color Options
 
 
MIA G2Dual Color Decal Kit - Auto-G Auto-G2

$ 13.99
 
 Ready To Install Parts

Contents:
• 2 Sheets Waterproof Sticky Back No Residue High Quality Decals
 
Features
* Waterproof Durable Decals (these are not like the onion skin stock decals that peel off easily)
* Help Reinforce the Foam Body and Stabilizing Areas
* Easy Trim, Peel and Apply
* High Visibility Graphics in a Dual Color Tone with Black and White Lettering
 
Color-Color-White
 
 
MIA G2Dual Color B Decal Kit - Auto-G Auto-G2

$ 13.99
 
 Ready To Install Parts

Contents:
• 2 Sheets Waterproof Sticky Back No Residue High Quality Decals
 
Features
* Waterproof Durable Decals (these are not like the onion skin stock decals that peel off easily)
* Help Reinforce the Foam Body and Stabilizing Areas
* Easy Trim, Peel and Apply
* High Visibility Graphics in a Dual Color Tone with Black and White Lettering
 
Color-White-Color
 
 
MIA G2™ Standard Navigation Decal Kit - Auto-G Auto-G2
Red Right Side, Green Left Side (Front Viewed)
 
This Particular Color Scheme is an Orientation Aid by using Red and Green Individually on each side of the body and stabilizing areas. Great for beginner pilots.

$ 13.99

 Ready To Install Parts

Contents:
• 2 Sheets Waterproof Sticky Back No Residue High Quality Decals

Features
* Waterproof Durable Decals (these are not like the onion skin stock decals that peel off easily)
* Help Reinforce the Foam Body and Stabilizing Areas
* Easy Trim, Peel and Apply
* High Visibility Graphics in a Standard Navigation Colors with Black and White Lettering
 
Color

MIA G2™ Tri Color Decal Kit - Auto-G Auto-G2

$ 14.99

 Ready To Install Parts  

Contents:
• 2 Sheets Waterproof Sticky Back No Residue High Quality Decals

Features
* Waterproof Durable Decals (these are not like the onion skin stock decals that peel off easily)
* Help Reinforce the Foam Body and Stabilizing Areas
* Easy Trim, Peel and Apply
* High Visibility Graphics in a Tri Color Tone with Black and White Lettering

 

Tri-Color
Please Read
Manufacturer Instructions
 use in a well ventilated area.
 High Quality CA Glue Medium Viscosity
For all Hobby Modeling Assembly Projects requiring an easy to use CA Glue . Bottle size ideal for various model assembly projects. Works great with MIA G10 and Carbon Frames Assembly. 

 

1/2  Fluid Oz. Bottle w/ Fine Tip Nozzle Applicator
 
Tip (For better control, use toothpick to apply)
(1) Test Fit parts to be joined
(2) Apply CA to 1/2 of parts to be joining
(3) Apply CA Accelerator (Kicker) to other 1/2  part (4) Align and Join parts for instant assembly.

 

$4.99

Please Read
Manufacturer Instructions
use in a well ventilated area.

High Quality CA Accelerator Spray (Kicker)

For all Hobby Modeling Assembly Projects requiring a Fast CA Glue Joint Setting

2  Fluid Oz. Bottle and Sprayer

 
Tip (obetter control, use toothpick to apply)
(1) Test Fit parts to be joined
(2) Apply CA to 1/2 of parts to be joining
(3) Apply CA Accelerator (Kicker) to other 1/2  part (4) Align and Join parts for instant assembly.

 

$6.99

Solution Graphics

 
 
This site was designed, developed and is managed by Mario I. Arguello. Last updated 10/07/14
MIA Micro-FLIGHT, MIA Designs, MIA Palm-Size, MIA Finger-Size, MIA TUFF, MIA Phantom, MIA Edge, MIA EZ , MIA Glyphics,  MIA "A" Struts,  MIA G2 EGA, MIA Robo, MIA Cyclops, MIA Photon,
MIA Sport LE, MIA Robin 280, MIA Bumble Bee, MIA Mosca, MIA House FLY, MIA Falcon, MIA Bullet, MIA Diablo, MIA Uniflybar, MIA PARH, MIA Moto-Cooler, MIA Delta, MIA BBW, MIA MPG, MIA MTG,
MIA Hurricane, MIA Breeze, MIA Pilot Figures and with Swept-Back Hair, are product trademarks owned by Mario I. Arguello
All Rights Reserved. © Copyright 1999-2014 Mario I. Arguello
Web Site Content, Product Specifications, Product Availability and Prices are subject to change without notice.