This helicopter has
very little cons, other than perhaps being too mild for more
advanced pilots and no option, at time of our Upgrades for non-scale
more free-style flying.
Blades are plastic cambered which are limited for hovering and mild
flights
Motors are standard brush type and will wear out fast.
The Stock Nine Eagles Kestrel 500SX Helicopter is stable to
begin with,
but you can get even more stability
and far better flight times
with some MIA Upgrades, as seen in
this photo and video.
MIA Upgraded Kestrel In Action!
MIA Upgrades provide a Real
Helicopter PRO Custom Look!
MIA TUFF (TM)
Struts/Skids Landing Gear Kit
Kestrel 500SX
Benefits
Higher protection for
hard landings
Wider Footprint for
easier takeoffs and Landings
Robust Mechanically and
in Appearance
This kit was designed for those who
wish to add additional protection to the Kestrel with
a light but ultra tough landing gear, which assembled
with hardware and a bit of CA glue. Has a very robust
and wider footprint for more stable takeoffs and
landings. A heli saver no Kestrel should do without!
Designed to work with stock frame.
Works best with all other Kestrel MIA Upgrade kits.
This kit was designed for those who
wish to explore a little more precision flying with a
more stylish and custom carbon look flying sub-Micro
helicopter.
Designed to work with stock frame.
Works best with all other Kestrel MIA Upgrade kits.
This kit was designed for those who
wish to explore a little more precision flying with
MIA Custom Airfoil blades for some awesome! stability
and control.
Designed to work with stock rotor
head. Works best with all other Kestrel MIA Upgrade
kits.
Kit Includes:
MIA Wood Blades with
custom airfoil
Heat Shrinkable Blade
Covering Sleeves
NEW!
$12.99
MIA Carbon Tail
Boom Kit
Kestrel 500SX
Benefits
Greater tail stability
with less tail power required
Robust carbon boom
Better tail motor
molded support
This kit was designed for those who
wish to have additional tail stability , precision and
control.
Designed to work with stock frame.
Works best with all other Kestrel MIA Upgrade kits.
Can balso be used for
the tail motor on the Kestrel 500SX Helicopter
MIA's especial custom
designed motor heat sink, offers both
"Functionality" and awesome
cool "Hot-Rod Looks!"
A lightweight alternative
to standard and more typical extrusion type heavier heat
sinks. Improves heat dissipation of Walkera 4#3 motor,
at a much lighter weight close to 1 Gram! .
Proprietary
S-Coil shape design and exhaust
pipe pulls heat away from motor by using side airflow to
cool heat sinking coil and pipe. Your Walkera 4#3 will
stay cooler and look cooler too!
Custom Heat
Sink
Heat Sink works with
the following Motors:
Walkera 4#3 Stock
motors, or ANY N20 Type Motor, also works with Micro
Helicopter tail Motors of similar shape and size, N20 or
N30.
$6.99
Please Read
Manufacturer Instructions and use in a well ventilated area.
CA Glue Medium Viscosity
For all Hobby Modeling Assembly Projects requiring an
easy to use CA Glue . Bottle size ideal for various
model assembly projects. Works great with MIA G10 and
Carbon Frames Assembly.
Tip: Apply
to joining parts, then use CA Accelerator (Kicker)
spray
to speed up Joint
assembly.
1/2
Fluid Oz. Bottle with Fine Tip Nozzle Applicator
$4.99
Please Read
Manufacturer Instructions and use in a well ventilated area.
CA Accelerator Spray (Kicker)
For all Hobby Modeling Assembly Projects requiring a
Fast CA Glue Joint Setting