|
06/12/09
-
Walkera 4G3
- (Novus CP)
Original Product
Pros
Great 3D 12 inch rotor Collective
Pitch helicopter for advanced users.
Cons
The stock heli
offers very little protection to the helicopter with a weak
LG.
Battery cage
location makes helicopter slightly tail heavy.
For people
transitioning from a Fixed Pitch helicopter, the control, although
very smooth, it is very sensitive, great for advanced pilots, but
requires further stabilization so to make control easier for pilots
not yet familiar with CCPM helis.
Tail guard is
simply a carbon thin rod that breaks easily.
Motor has no
cooling.
|
|
|
|
 Sub-Micro
Helicopter Upgrades
Before you
Buy - Please click here and read this Agreement
The Upgrades on this Page will also work with
the Novus CP helicopters. Walkera and Novus helicopter share the
same architecture and parts, only different label. |
|
|
4G3 Enhanced with MIA Upgrades
 |
Better Landing
Gear |
|
Better Battery
Mounting for CG Adjustment |
|
Better Tail Guard |
|
Carbonized Look
Canopy-Fin |
|
Higher Rotor Head
Stabilization |
|
-
-
-
-
-
- Separate item cost
- Color Canopy/Fin/Decals $12.99
- MIA TUFF (TM) LG $9.99
- Exhaust Pipe Style MIA Moto Cooler Heat Sink
$8.99
- Total $31.97
-
- with Carbonized Canopy
- Total $34.97
Save, purchase as a
Complete kit
|
MIA HOT ROD KIT- 4G3 |
| for
the Walkera 4G3 - 3D Helicopter
|
| A full
Hot Rod style kit.
|
|
Kit Includes: |
|
MIA TUFF (TM) LG
Upgrade Kit |
|
MIA Moto-Cooler (TM)
with Exhaust Pipe |
|
MIA Air Ram (TM) Canopy
in choice of color |
|
Vinyl Decal Sheet with
various Hot Rod design patterns |
-
- Please specify
canopy color choice
- HOT Colors
- Hot Orange, Hot Green, Hot Blue,
Hot Pink
- Standard Colors
- Silver, Black, Red, White, Blue,
Yellow, Green
Order CA Glue, and Accelerator, if you don't already
have it. |
|
NEW!
$29.99
|
|
Carbonized Canopy Hot Rod look
NEW!
$32.99
|
  |
|
MIA TUFF (TM) LG Upgrade
Kit - 4G3 |
| for
the Walkera 4G3 - 3D Helicopter
|
| A heli
saver Kit. Replaces stock thin wire landing gear with a
much more durable and more realistic one. Comes
with G10 battery support plate designed so that
various size batteries can be positioned forward or
rearward providing better adjustment of center of
gravity (CG). Stock plastic battery cage can also
be used, but it is limited to CG adjustment, which makes
the helicopter tail heavy.
G10 strut supports and battery plate
assemble quickly with CA glue, this assembly installs to
stock bottom of plastic frame with the stock battery
cage mounting screws, struts and skids are installed
press-fit. |
|
Kit Includes: |
|
2 MIA TUFF (TM) Struts |
|
2 G10 CNC Machined
Strut Supports |
|
2 G10 CNC machined
Skids |
|
1 G10 CNC Machined
Battery Support Plate |
|
2 Battery Support Bands
|
Order CA Glue, and Accelerator, if you don't already
have it. |
|
NEW!
$9.99
|
 |
|
MIA Phantom Canopy and
Fin Kit - 4G3 |
| for
the Walkera 4G3 - 3D Helicopter |
| Give your Walkera 4G3
helicopter that awesome!! stealth look with this
Superb! canopy and fin set. Molded from Carbon-like pattern material. |
|
Kit Includes: |
|
Phantom Carbon Style
Canopy |
|
Phantom Carbon Design
Vertical Stabilizer |
|
Mounting
Rubber Supports |
|
Decal Sheet |
|
|
NEW!
$15.99
|
 |
|
MIA AIR RAM Colors- Canopy and
Fin Kit - 4G3 |
| for
the Walkera 4G3 - 3D Helicopter |
| Give your Walkera 4G3
helicopter that awesome!! stealth look with this
Superb! canopy and fin set. Molded from Carbon-like pattern material. |
|
Kit Includes: |
|
Phantom Carbon Style
Canopy |
|
Phantom Carbon Design
Vertical Stabilizer |
|
Mounting
Rubber Supports |
|
Decal Sheet |
|
|
NEW!
$12.99
|
|
   |
      |
  |
 |
|
NEW! Now in Carbon
Pattern Style! |
|
MIA Phantom AIR RAM Canopy and
Fin Kit - 4G3 |
| for
the Walkera 4G3 - 3D Helicopter |
| Give your Walkera
4G3 helicopter extra cooling with this Air Scoop Canopy.
Canopy uniquely shaped and blended with 4 Air
scoops provide a ram of air into the motor and battery
to help keep them cool. Motor cooling is highly
effective when flying in Fast Forward flight but also
keeps motors cool while hovering due to unique shape and
placement of top air scoops in line with rotor prop
wash.
Air ram openings can
also be used for LED lights to give the helicopter a
particular visual effect.
Carbon
Pattern Only |
|
Kit Includes: |
|
Air Scoop Style Canopy |
|
Vertical Stabilizer
(bonus) |
|
Mounting
Rubber Supports |
|
Decorative Decal
Finishing Trim Sheet |
|
|
NEW!
$15.99
|
| |
 |
|
MIA Flybar Stability
Tuning Kit
-4G3
|
|
Preset Deluxe Stabilizers |
| for
the Walkera 4G3 - 3D Helicopter |
| This kit
enhances the helicopter rotor head stability and
control, by providing pre-determined,
2 matched and tested anodized red tip
weights, to increase the rotor head stability,
providing more precise and smoother rotor head
control. Especially recommended if you just
transitioned into Collective Pitch helis and you find
the stock helicopter is too sensitive to control inputs.
Kit Includes: |
|
2-Anodized Red
CNC machined tip weights |
|
4- Tip weight retainers |
|
|
NEW!
$9.99
|
 |
 |
|
MIA Moto-Cool-er (Custom Heat Sink) - 4G3 |
|
MIA's especial custom
designed motor heat sink, offers both
"Functionality" and awesome
cool "Hot-Rod Looks!"
A lightweight alternative
to standard and more typical extrusion type heavier heat
sinks. Improves heat dissipation of Walkera 4/3 stock
carbon brush motors,
at a much lighter weight close to 1 Gram!.
Proprietary
S-Coil shape design and exhaust
pipe pulls heat away from motor by using side airflow to
cool heat sinking coil and pipe. Your Walkera 4#3 will
stay cooler and look cooler too! |
|
Custom Heat
Sink |
|
|
Heat Sink works with
the following Motors:
ALL Walkera 4#3 and
4G3 Stock
motors, or ANY N20 Type Motor, also works with Micro
Helicopter tail Motors of similar shape and size, N20 or
N30.
|
|
$6.99
|
 |
|
MIA "TUFF ™" Training Gear Kit |
| for
the Walkera 4G3
Helicopter |
| Especially
made for assisting first -time pilots, learn to fly ultra
tiny helicopters. Simple yet extremely effective design,
has natural spring cushion and grips to slippery floors
while allowing easy take offs and spider like grip
landings!
Press-Fit assembly for
ease of assembly and compact transport.
This particular Kit is made to the correct
proportions and weight for MIA Palm-Size Helicopters, works
perfectly with all Walkera 4/3 tiny helis.
Tired of heli tip overs? or afraid to crash on first
flights? Try this training gear, you will probably never
want to take it off!
|
|
1 G10 CNC machined center |
|
4 Formed Legs |
|
4 yellow, rod end tips |
|
4 skid attachments
|
|
|
NEW!
$6.99
|
Please Read
Manufacturer Instructions and use in a well ventilated area.
|
|
CA Glue Medium Viscosity |
|
For all Hobby Modeling Assembly Projects requiring an
easy to use CA Glue . Bottle size ideal for various
model assembly projects. Works great with MIA G10 and
Carbon Frames Assembly. |
- Tip: Apply
to joining parts, then use CA Accelerator (Kicker)
spray
- to speed up Joint
assembly.
|
|
1/2
Fluid Oz. Bottle with Fine Tip Nozzle Applicator |
|
|
$4.99
|
Please Read
Manufacturer Instructions and use in a well ventilated area. |
|
CA Accelerator Spray (Kicker) |
|
For all Hobby Modeling Assembly Projects requiring a
Fast CA Glue Joint Setting |
| |
|
2 Fluid Oz.
Bottle and Sprayer |
|
|
$6.99
|
|
MIA JIS #000
Ultra Precision Screwdriver
|
|
for the Walkera 4G3 Helicopter |
|
Designed
especially for Palm Size Helicopters, like the Walkera
4G3, 4#3, Blade MCX, MIA and similar ones that
uses ultra miniature hardware that require extra
finesse and ultra precision.
Works and feels comfortable, the tubular thinner
diameter of this MIA tool, allows for greater handling
finger tip precision , when tightening or loosening
ultra
tiny
screws.
A great tool for
Palm-Size Helicopters or Hobby Projects Requiring
Precision. |
|
Aluminum
Handle |
|
Black Oxide
Precision Tip |
|
Engraved
Industry Standard Type and Size |
|
|
|
|
- Complementary tool to MIA
JIS #000
- If you already have the
#000, Get this
- #00 one for larger size
screws.
MIA JIS #00
Ultra Precision
Screwdriver
|
|
for the Walkera 4G3
Helicopter |
|
Designed
especially for Palm Size Helicopters, like the Walkera
4G3, 4#3, Blade MCX, MIA and similar ones that uses ultra miniature
hardware that require extra finesse and ultra precision.
Works and feels comfortable, the tubular thinner
diameter of this MIA tool, allows for greater handling
finger tip precision , when tightening or loosening
small screws.
A great tool for
Palm-Size Helicopters or Hobby Projects Requiring
Precision. |
|
Aluminum
Handle |
|
Black Oxide
Precision Tip |
|
Engraved
Industry Standard Type and Size |
|
|
|
-
Ordering
and Shipping Info , Click Here
|
|
|
|
|
