*
Scale Body and Tail Fin Kit Painted in Olive Drab with
Black Interior
Improve power and
flight times with this 3.7 V 160 mAh 30C battery upgrade.
Specially selected for scale flight with scale bodies, or as
a general battery upgrade.
Upgrade
TURBO Li-Pol Options
It's
Here! MIA MD500E -
USA Military Series
*
Scale Body and Tail Fin Kit Painted in Olive Drab with
Black Interior
* Choice of Black or
Clear Window
* G10 Fiberglass Landing
Gear Kit (user assembly required, use quality hobby
grade CA Glue)
*
U.S. Army Insignia Vinyl Decal Sheet (user trims and
applies)
*
Rubber Battery Straps
NOTE: Due to the highly scale and
detailed nature of this kit, we highly recommend
the use of 150 mAh to 200 mAh 1S 3.7V Li-Polymer
batteries to allow for good flight times.
Select accordingly for your specific Walkera, Eflite
or Nine Eagles palm-size helicopter.
Painted Body - Struts -Skids
Li-Pol Battery Upgrade for the E-FLite mSR, mCX2 and Older
mCX helicopters.
Improve power and
flight times with this 3.7 V 160 mAh 30C battery upgrade.
Specially selected for scale flight with scale bodies, or as
a general battery upgrade.
Upgrade
TURBO Li-Pol Options
It's
Here!
MIA Air-Ram Delta™
- PRO Kit
Give your Helicopter a Turbo Charge Ultra Sleek Look!
Now availble in Carbon Pattern Style!
MIA
Air-Ram Delta™
- PRO Kit
Our highly popular MIA
Air-Ram™Canopies we offer for the Walkera 4#3 and
similar size and style tiny helis, now for the
E-Flite
Blade mSR, mCX,
mCX2 and
Nine Eagles Solo
helicopters.
Brand New! more robust, universal
MIA
A-Style LG PRO
design with an Ultra
miniature MIA Delta™
Tail Guard.
About the New
design LG
Comparison of LG with, Stock and MIA other versions
LG
Super Tough
Great for beginner Pilots
Ultra sleek
low profile
Great for Mid to advanced Pilots
Works with mSR, mCX,
Solo
Lighter works with MCX only
Stock
Plastic
Lighter
Weak
MIA Air Ram Delta™
Pro Kit LG
Yes
MIA TUFF LG™
Recommended
MIA MCX Pro
yes
Stock LG
No
yes
The LG is very tough and
lighter weight, composite, much stronger than our original
MIA MCX PRO LG, but not as tough as our
MIA
TUFF™
LG for the same helis. This is a setup for intermediate
to advanced pilots looking for that extra cool factor. The lower
profile and sleek design allows the helicopter to cruise much faster
than with the stock setup.
So if you are looking to give your mSR, mCX or Solo helicopter,
a turbo charge look, without changing to more powerful motors,
this is a very neat way to do it.
Available with Black, Yellow
and Orange canopies with matching vinyl repositionable decals sheet.
MIA Phantom™ Carbon pattern canopies, on special requests. Please
enquire via our
E-mail
MIA Air Ram Delta
™ - Pro kit
Works with mSR,
mCX, mCX2 , Solo helis
Protection, greater stability and great looks for your E-Flite
Blade mSR.
Robust
Design, CNC
Machined Light Weight G10 fiberglass and plastic molded
ultra-miniature TUFF LG parts.
MIA TUFF (TM) LG - mSR* Will also work with the E-FLite
mCX, mCX2 and S300 helis. Kit Contents:
G10 fiberglass parts tree
2 TUFF Struts
2 G10 Skids
2 Rubber-Spacers
2 Nylon screws
2 Rubber Battery Straps
MIA TUFF LG Kit -
mSR$9.99
MIA S300 2010
Our Popular S300 Scale
Upgrade Kit, redesigned for
E-Flite Blade mSR, mCX
and Nine Eagles Solo
Pro helicopters. If
you like Scale Details, and are fond of the Hughes -Schweizer
300 helicopters, you'll Love this Kit!
Basically A whole new more robust, realistic and
more stable Helicopter *
MIA G10 Fiberglass Parts Tree
*
Complete with true to Scale Hughes 300
Landing Gear struts, boom bracing
lightweight and highly durable parts*
MIA
Aluminum Boom and Skids*
MIA
Matching, true to scale Vertical and Horizontal
Stabilizers
Frame
colors
Canopy Colors
Specify mSR, mCX, etc,
MIA MD500E - mSRInstructions Here
If you love the real MD500E helicopter
look, you will love this fabulous! true to scale
miniature light weight detailed body kit on your mSR.
The clear windshield can be left clear or decorated with
supplied decal trim material to create window frames. The body simply wraps around existing
helicopter main frame and is retained by the frame
canopy mounting arms.
Now with MIA innovative
Press-Fit Molded Tail Finthat simply installs over tail
Motor. MIA MD500E Scale Body Kit- mSRKit Contents:1 - 500E Scale body , fins and
windshield
1-
G10 fiberglass parts tree, struts, battery supports
2 - Aluminum Skids
8 - Rubber-Skid Retainers-Gripers
1- Set of Trim and Logo Decals
2 - Rubber Battery Straps
Combo Scale MD500E Body With G10 FG LG and Aluminum
Skids Kit - mSR
$29.99
A sample of
similar size helicopters with the MIA S300 canopy with various MIA
LG kits.Another great scale body of the cool
looking Schweizer or Hughes
300 helicopter, with matching tail fins and window
framing trim decal material.The body simply wraps around existing
helicopter main frame and is retained by the frame
canopy mounting arms.Purchase the MIA TUFF LG Kit-mSR sold
separately, for a more appealing and realistic flyer.
MIA S300
Scale Body Kit- mSRThis body kit will work with the stock mSR lg
but works and looks best with the MIA S300 2010
Scale frame kit or for a more simpler installation can be used
with the MIA TUFF™ LG Kit for the mSR,
sold separately. Kit Contents:1 - S300 Scale body , fins
1- Set of Trim and Logo DecalsNote: for personal customization you
can carefully trim, with a Dremel tool, the window
section leaving just the window framing or mask
the window framing and rest of canopy, then paint the
window area black, as our green body shows.
However, we recommend you use the trim decal
material strips provided in the kit to make the window
frame as this is easier and it provides a clean
finish as is our black canopy done with the white window
trims. Light color bodies come with black
trims, dark color bodies come with white trims. The
final detailed options are many if you get a little
creative with our decal sheets for other helicopter
bodies, sold separately.
MIA S300 Scale BodyColors withTrim Decals - mSR
$9.99
A
cool and unique body with a supper trike style LG.
Inspired by the famous Little Nellie , James Bond 007 autogyro, flown in the movie You Only Live Twice.
*
MIA G10 Fiberglass Trike LG Parts Tree** Wheels, Wheel Axles and Wheel Mounting
Hardware* LG Mounting Hardware*
MIA
Nano Nellie Body, Tail Fin and Decals
Works with all the following:
E-Flite Blade MSR, MCX
Original and MCX Schweizer 300C/Hughes 300 and E-Flite's
latest mCX2 coaxial helicopter.
---------------
The following video is included here for
inspirational purposes.
.
We are not offering the MIA RC Autogyro kit
version yet, but we figured that many folks would
appreciate the Nano Nellie body and trike style LG kit,
call it a little bit of dreaming and 007
secret agent excitement, if you will, for the mSR, mCX and
similar size helis.
MIA Nano Nellie Body - Trike
LG Kit Price $19.99
MIA JIS #000
Ultra Precision Screwdriver
for the MCX-Walkera Helicopter
Designed
especially for Palm Size Helicopters, that
use ultra miniature hardware that require extra
finesse and ultra precision.
Works and feels comfortable, the tubular thinner
diameter of this MIA tool, allows for greater handling
finger tip precision , when tightening or loosening
ultra
tiny
screws.
A great tool for
Palm-Size Helicopters or Hobby Projects Requiring
Precision.
Aluminum
Handle
Black Oxide
Precision Tip
Engraved
Industry Standard Type and Size
MIA JIS #00
Ultra Precision
Screwdriver
for the MCX-Walkera
Helicopter
Designed
especially for Palm Size Helicopters, that use ultra miniature
hardware that require extra finesse and ultra precision.
Works and feels comfortable, the tubular thinner
diameter of this MIA tool, allows for greater handling
finger tip precision , when tightening or loosening
small screws.
A great tool for
Palm-Size Helicopters or Hobby Projects Requiring
Precision.
Aluminum
Handle
Black Oxide
Precision Tip
Engraved
Industry Standard Type and Size
Please Read
Manufacturer Instructions and use in a well ventilated area.
CA Glue Medium Viscosity
For all Hobby Modeling Assembly Projects requiring an
easy to use CA Glue . Bottle size ideal for various
model assembly projects. Works great with MIA G10 and
Carbon Frames Assembly.
Tip: Apply
to joining parts, then use CA Accelerator (Kicker)
spray
to speed up Joint
assembly.
1/2
Fluid Oz. Bottle with Fine Tip Nozzle Applicator
$4.99
Please Read
Manufacturer Instructions and use in a well ventilated area.
CA Accelerator Spray (Kicker)
For all Hobby Modeling Assembly Projects requiring a
Fast CA Glue Joint Setting
Palm-Size Helicopter Upgrades
Kit Contents:
If you love the real MD500E helicopter
look, you will love this fabulous! true to scale
miniature light weight detailed body kit on your mSR.
The clear windshield can be left clear or decorated with
supplied decal trim material to create window frames.
The body simply wraps around existing
helicopter main frame and is retained by the frame
canopy mounting arms.
Kit Contents:
1 - 500E Scale body , fins and
windshield
Kit Contents:
1 - S300 Scale body , fins 
